15-Liter Europa B Autoclave with Printer

Professional autoclave model Europa Class B, 15 litre capacity with integrated printer.

An autoclave for type B loads allows you to sterilize hollow bodies such as handpieces and turbines and porous materials (gowns, gauze, etc.).

PID (Proportional Integral Derivative) System

It is the ultimate expression of closed-loop control. It ensures constant control and monitoring of the entire autoclave system, automatically intervening in the event of anomalies in the technical and electronic parameters.

Tanks inside the machine

In the event of accidental addition of unsuitable liquids, all autoclave tanks are inspectable and cleanable, as required by technical regulations. All autoclaves contain a pure water tank and a used water tank. Each tank is equipped with probes to indicate the maximum and minimum levels.

Preset Temperatures

The temperatures set on our autoclave cycles are 134°C and 121°C. The 134°C cycles are normally used for sterilizing solid and ferrous materials. The 121°C cycles are used for thermoplastics and sensitive materials.

Ease of use

The sterilization cycle is selected by pressing a button and activated by pressing another. The first button allows you to scroll and view the data for each cycle on the large display to select the most suitable one; the second button automatically starts the entire sterilization cycle. Messages and LED indicators will alert you to any errors or alarms.

Fully automatic cycles

All phases are managed by an advanced board complete with a powerful microprocessor. Each phase (vacuum, preheating, exposure time, drying) is monitored, supported, and managed automatically.

Unattended cycles with automatic shutdown

During sterilization cycles, an automatic function starts an anti-condensation phase and automatic shut-off in the absence of the operator at the end of the cycle.

Test cycles

Our autoclaves are equipped with test cycles for periodic monitoring using physical and functional systems. The Helix test evaluates the vacuum capacity of hollow bodies. The Bowie & Dick test evaluates the vacuum capacity of porous bodies. The Vacuum test evaluates the vacuum maintenance capacity.

Constant monitoring of cycles

A device ensures constant monitoring of sterilization cycles. Any type of anomaly is detected and immediately blocked if it affects the sterilization cycles. The operator is notified of the anomaly via a message.

All cycles ensure sterilization of type B loads

All sterilization cycles have a fractionated vacuum system, controls and parameters that ensure the sterilization of type B loads. Even an incorrect selection of the desired cycle always ensures safe sterilization on every type of material treated.

Autoclave equipped with built-in printer.

Supplied with a closed tray holder, 4 aluminum trays, 1 double-use key (to remove the trays and to adjust the door), water inlet and outlet hoses, cleaning sponge.

Technical features

• External dimensions: 510 x 390 x 590 mm (W x H x D)

• Chamber dimensions: 245 x 320 mm (Ø x depth)

• Operating voltage 230 V - 50/60 Hz

• Maximum power consumption: 1,700 W

• Weight: 54 kg

• Built-in printer: YES

• Manual closing: YES

• Pure deionizer provision: YES

• PID system: YES

• Cycles: 121°C Wrapped

• Min-max operating pressure: 1.04 - 1.30

Minimum total cycle time*: 56 minutes (25 + 18 + 13)

• Cycles: 121°C Unwrapped

• Min-max operating pressure: 1.04 - 1.30

• Minimum total cycle duration *: 55 minutes (25 + 18 + 12)

• Cycles: 134°C Flash

• Min-max operating pressure: 2.02 - 2.38

• Minimum total cycle time *: 33 minutes (25 + 4 + 4)

• Cycles: 134°C Wrapped

• Min-max operating pressure: 2.02 - 2.38

• Minimum total cycle duration *: 43 minutes (25 + 5 + 13)

• Cycles: 134°C Unwrapped

• Min-max operating pressure: 2.02 - 2.38

• Minimum total cycle duration *: 42 minutes (25 + 5 + 12)

• Cycles: 134°C Prion

• Min-max operating pressure: 2.02 - 2.38

• Minimum total cycle time *: 58 minutes (25 + 20 + 13)